TSC TE300 Label Printing Software & Setup

Compatibility evidence: Production-observed

Successful jobs for this exact reported model exist in LabelInn production telemetry. The connection, firmware, LabelInn version, and date were not captured unless stated below.

Production telemetry contains successful TSPL print jobs reported as TSC TE300; connection was not captured.

What LabelInn supports

small text, dense barcodes, and durable 4-inch product labels. The TE300 is the 300 DPI counterpart to the TE200/TE210 class. It is useful when a 203 DPI head cannot resolve compact symbols or fine type.

• TSPL-EZD (native) output at the selected resolution.
• Direct command printing is supported when an available interface is selected.
• Render at 300 DPI, keep width within 105.7 mm, and configure the correct ribbon/media mode. Do not reuse 203 DPI coordinates without conversion.

Setup checklist

1. Confirm the complete model name, suffix, installed interface, and current command-language mode.
2. Set the page DPI and printable width to match the physical printhead.
3. Load the correct media; if applicable, match ribbon mode and sensor type.
4. Print a small calibration label before sending a production batch.

Operating-system notes

Windows — Supported

Use either the operating-system print path or direct protocol output when this record marks direct printing as supported.

macOS — Supported

Direct protocol output avoids a model-specific print driver when the selected connection is available to macOS.

Android — Conditional

Android support is conditional on a supported USB, Bluetooth, or network path; the production observation did not record which path was used.

Common configuration problems

• Unconverted 203 DPI templates shrink at 300 DPI.
• Dense barcodes still need a module size that the scanner and print process can reproduce.

Printer troubleshooting →